量子ビーム組織解析研究室へようこそ

論文, Proceedings

　　　太字は研究室所属メンバー

2024年

1. 【日本銅学会第56回論文賞受賞】柄澤誠一，馬場可奈，小貫祐介，大平拓実，三田昌明，伊東正登，鈴木茂，佐藤成男
   "固溶型銅合金における高温変形中の転位増殖と転位運動に対する合金元素の作用"
   銅と銅合金, 63, 2024, 1-7.

   　　

2. 鈴木茂 , 佐藤成男, 今宿晋, 佐藤裕之, 田中俊一郎
   "X線回折法により測定される多結晶鉄合金の残留応力および関連微細組織"
   鉄と鋼, 110, 2024, 900-911.
3. Katsuhiro Ueno, Atsunori Hashimoto, Kazuaki Toyoura, Naoyuki Hatada, Shigeo Sato, Tetsuya Uda
   "Comprehensive understanding of the crystal structure of perovskite-type Ba3Y4O9 with Zr substitution: a theoretical and experimental study"
   Dalton Transactions, 53, 2024, 6070-6086.
4. 佐藤李行，河原幸汰，富田俊郎，星川晃範，鈴木茂，佐藤成男
   "中性子回折によるパーメンジュール合金の高温相変態解析"
   X線分析の進歩, 55, 2024, 327-334.
5. 大後直樹，林桃希，飯原智美，��野こずえ，伊藤優樹，松野下裕貴，牧一誠，森広行，鈴木茂，佐藤成男
   "銅合金の変形モードによるGN/SS 転位増殖への影響"
   X線分析の進歩, 55, 2024, 243-250.
6. 馬場可奈，水澤和大，武田紗奈，下村樹，永野隆敏，伊藤優樹，松永裕隆，松野下裕貴，森広行，牧一誠，鈴木茂，佐藤成男
   "固溶型銅合金の耐応力緩和特性に対する転位密度と転位の易動度の作用"
   X線分析の進歩, 55, 2024, 205-213.
7. 千葉雅樹, 見澤謙佑, 谷本久典, 熊谷正芳, 佐藤成男, 川又透, 鈴木茂
   "大きな磁歪を示す鉄合金を搭載したデバイスの振動におけるひずみや磁界の変化"
   鉄と鋼, 110, 2024, 404-413.
8. Pramote Thirathipviwat, Makoto Hasegawa, Yusuke Onuki, Shigeo Sato, Oleg V. Mishin
   "In situ neutron diffraction study and electron microscopy analysis of microstructure and texture evolution during annealing of rolled CoCrFeNi alloy doped with 1 at.%C"
   Materials Characterization, 212, 2024, 113980 (11).
9. Kenta Yamanaka, Manami Mori, Daishin Yokosuka, Kazuo Yoshida, Yusuke Onuki, Shigeo Sato, Akihiko Chiba
   "Effect of matrix dislocation strengthening on deformation-induced martensitic transformation behavior of metastable high-entropy alloys"
   Materials Research Letters, 12, 2024, 1-9.

2023年

1. Kiyoshi Urakawa, Motohiro Kasuya, Shigeo Sato, Kiyoshi Kanie, Naoyuki Owari, Takashi Ebata, Shigeru Suzuki
   "Cold workability and magnetic properties of FeCo-V alloys With the addition of a small amount of Al"
   IEEE Transactions on Magnetics, 59, 2023, 99.
2. Shigeo Sato, Kazunari Maki, Masato Ito, Shigeru Suzuki
   "Factors affecting the physical properties of electrically conductive copper and dilute copper alloys"
   Materials Transactions, 64, 2023, 2039-2050.
3. 水澤和大, 飯原智美, 高野こずえ, 伊藤優樹, 牧一誠, 鈴木茂, 佐藤成男
   "耐応力緩和特性の結晶粒径依存性に対する転位タイプの影響"
   銅と銅合金, 62 (2023) 17-22.
4. 千星聡, 瀧藤優斗, 金野泰幸, 佐藤成男, 兵藤宏
   "複相強化型Cu-Ti合金薄板材の作製"
   銅と銅合金, 62 (2023) 68-72.
5. Pramote Thirathipviwat, Sega Nozawa, Moe Furusawa, Yusuke Onuki, Makoto Hasegawa, Katsushi Matsumoto, Shigeo Sato
   "A correlation between texture evolution and dislocation density in Al-Mg alloys during uniaxial tensile deformation"
   Materials Letters, 349, 2023, 134829 (5).
6. Yusuke Onuki, Kasumi Masaoka, Shigeo Sato
   "Ductile behavior assisted by continuous dynamic recrystallization during high-temperature deformation of calcium-added magnesium alloy AZX612"
   Journal of Alloys and Compounds, 329, 2023, 171147 (10).
7. Pramote Thirathipviwat, Yusuke Onuki, Jithin Vishnu, Praveenkumar Kesavan, Ansheed Raheem, Geetha Manivasagam, Karthik V Shankar, Makoto Hasegawa, Shigeo Sato
   "Superior fretting wear resistance of 30Nb5Ta30Ti15V20Zr refractory high entropy alloy in a comparison with Ti6Al4V"
   Materials Letters, 329, 2023, 134105 (4).
8. 河原幸汰，梅村和希，平野孝史，小貫祐介，星川晃範，富田俊郎，佐藤成男
   "低合金TRIP 鋼の二相域温度によるミクロ組織形成依存性の中性子回折観察"
   X線分析の進歩, 54, 2023, 233-241.
9. 佐藤成男、松永裕隆、西村透、牧一誠、鈴木茂
   "銅合金の特性におよぼすミクロ組織因子とそれに対するX線解析"
   金属, 93, 2023, 35-42.
10. Kenta Yamanaka, Manami Mori, Yusuke Onuki, Shigeo Sato, Akihiko Chiba
    "Dislocation density of electron beam powder bed fusion Ti-6Al-4V alloys determined via time-of-flight neutron diffraction line-profile analysis"
    Metals, 13, 2023, 86 (11).
11. Pramote Thirathipviwat, Yusuke Onuki, Kazuki Umemura, Shigeo Sato
    "Microstructure, dislocation density and microhardness of 1 %C-doped CoCrFeNi complex concentrated alloys during isochronal annealing"
    Journal of Alloys and Compounds, 930, 2023, 167504 (10).

2022年

1. Karri Sri Naga Sesha, Kenta Yamanaka, Manami Mori, Yusuke Onuki, Shigeo Sato, Damien Fabregue, Akihiko Chiba
   "Demonstrating a duplex TRIP/TWIP titanium alloy via the introduction of metastable retained β-phase"
   Materials Research Letters, 10, 2022, 754-761.
2. Pramote Thirathipviwat, Sega Nozawa, Moe Furusawa, Yusuke Onuki, Makoto Hasegawa, Katsushi Matsumoto, Shigeo Sato
   "In-situ neutron diffraction study on a dislocation density in a correlation with strain hardening in Al-Mg alloys"
   Materials Science and Engineering A, 855, 2022, 143956 (10).
3. 【日本銅学会第54回論文賞受賞】水澤和大、高野こずえ、伊藤優樹、松永裕隆、牧一誠、鈴木茂、佐藤成男
   "固溶型銅合金の低温焼鈍による強度・応力緩和特性の改質メカニズム"
   銅と銅合金, 61 (2022) 28-33.

   　　

4. 伊東正登、小貫祐介、高野こずえ、佐藤成男、鈴木茂
   "銅と銅合金の圧延集合組織発達に及ぼす種々の因子の数値的検討"
   銅と銅合金, 61 (2022) 76-80.
5. 千葉雅樹、伊藤優樹、森広行、松永裕隆、牧一誠、佐藤成男、鈴木茂
   "銅合金に残留する三次元的応力の評価"
   銅と銅合金, 61 (2022) 103-107.
6. 小貫祐介、伊東正登、佐藤成男、鈴木茂
   "中性子回折による銅と銅合金の引張変形中の集合組織その場観察"
   銅と銅合金, 61 (2022) 290-294.
7. Manami Mori, Ting Guo, Kenta Yamanaka, Zuyong Wang, Kazuo Yoshida, Yusuke Onuki, Shigeo Sato, Akihiko Chiba, R.D.K. Misra
   "The significance of thermomechanical processing on the cellular response of biomedical Co-Cr-Mo alloys"
   Journal of the Mechanical Behavior of Biomedical Materials, 133, 2022, 105360 (12).
8. Yusuke Onuki, Kazuki Umemura, Kazuki Fujiwara, Yasuaki Tanaka, Toshiro Tomida, Kaori Kawano, Shigeo Sato
   "Microstructure formation and carbon partitioning with austenite decomposition during isothermal heating process in Fe-Si-Mn-C steel monitored by in situ time-of-flight neutron diffraction"
   Metals, 12, 2022, 957 (15).
9. Shun-Ichiro Tanaka, Shigeo Sato, Kengo Matsuda, Masaki Chiba, Shigeru Suzuki
   "Microscale changes in microstructure and stress distribution in duplex stainless steel caused by plastic deformation"
   ISIJ International, 62, 2022, 963-969.
10. Shigeru Suzuki, Kazuhiro Mizusawa, Toru Kawamata, Rie Yamauchi Umetsu, Tsuyoshi Kumagai, Tsuguo Fukuda, Shigeo Sato
    "Characteristic twin formation in body-centered cubic Fe-Ga alloy single crystals with different orientations"
    ISIJ International, 62, 2022, 957-962.
11. Manami Mori, Kenta Yamanaka, Yusuke Onuki, Shigeo Sato, Akihiko Chiba
    "Analysis of hierarchical microstructural evolution in electron beam powder bed fusion Ti-6Al-4V alloys via time-of-flight neutron diffraction"
    Additive Manufacturing Letters, 3, 2022, 100053 (8).
12. Yutao Zhou, Tomohiko Hojo, Amane Kitahara, Yusuke Onuki, Shigeo Sato, Motomichi Koyama, Eiji Akiyama
    "Austenite stabilization kinetics in early stages of austempering treatment in TRIP-aided steel using in-situ neutron diffraction technique"
    Materialia, 21, 2022, 101317 (6).
13. 馬場可奈、小貫祐介、長岡佑麿、伊東正登、鈴木茂、佐藤成男
    "中性子回折を用いた純銅の高温変形時における転位挙動の観察"
    X線分析の進歩, 53, 2022, 175-182.
14. 梅村和希、小貫祐介、星川晃範、富田俊郎、田中泰明、藤原知哉、諏訪嘉宏、河野佳織、佐藤成男
    "中性子回折測定によるRietveld 解析を用いた低合金TRIP 鋼の相変態観察"
    X線分析の進歩, 53, 2022, 231-241.
15. Masaki Chiba, Takenori Tanno, Maho Abe, Shuichiro Hashi, Kazushi Ishiyama, Toru Kawamata, Rie Y. Umestu, Kazumasa Sugiyama, Shigeo Sato, Yosuke Mochizuki, Koji Yatsushiro, Tsuyoshi Kumagai, Tsuguo Fukuda, Shun-Ichiro Tanaka, Shigeru Suzuki
    "Magnetic properties and substructure of iron-gallium alloy single crystals processed from ingot to wafers"
    Materials Transactions, 63, 2022, 502-507.
16. Daisuke Egusa, Ryo Manabe, Takuro Kawasaki, Stefanus Harjo, Shigeo Sato, Eiji Abe
    "Quantitative X-ray diffraction analysis of solute-enriched stacking faults in hcp-Mg alloys based on peak asymmetry analysis"
    Materials Today Communications, 31, 2022, 103344 (6).
17. Pramote Thirathipviwat, Shigeo Sato, Gian Song, Jozef Bednarcikef, Kornelius Nielsch, Juree Jung, Junhee Han
    "A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system"
    Scripta Materialia, 210, 2022, 114470 (5).

2021年

1. Toshiro Tomida, Sven C. Vogel, Yusuke Onuki, Shigeo Sato
   "Texture Memory in hexagonal metals and its mechanism"
   Metals, 11, 2021, 1653 (25).
2. 中川康太朗, 高野こずえ, 松永裕隆, 森広行, 牧一誠, 鈴木茂, 佐藤成男
   "固溶型銅合金の転位増殖に及ぼす塑性変形モードの影響"
   銅と銅合金, 60 (2021) 35-40.
3. 佐藤成男
   "量子ビームを用いたミクロ組織解析法の開発とそれに基づく力学特性や組織形成の理解"
   ふぇらむ, 26 (2021) 341-349.
4. Pramote Thirathipviwat, Yusuke Onuki, Gian Song, Junhee Han, Shigeo Sato
   "Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy"
   Journal of Alloys and Compounds, 890, 2021, 161816 (8).
5. Toshiro Tomida, Elena Vakhitova, Denis Sornin, Jonathan Wright, Manuel Francois, Yusuke Onuki, Takashi Hirano, Akinori Hoshikawa, Toru Ishigaki, Shigeo Sato
   "Texture Memory in Si-Mn and ODS Steels Observed In Situ by Pulsed Neutron and Synchrotron X-Ray Diffractions and Prediction by Double Kurdjumov-Sachs Relation: A Concept for Intense Variant Selection"
   Metallurgical and Materials Transactions A, 52, 2021, 1368-1381.
6. Kenta Yamanaka, Manami Mori, Kazuo Yoshida, Yusuke Onuki, Shigeo Sato, Akihiko Chiba
   "Surface evolution and corrosion behaviour of Cu-doped carbide-reinforced martensitic steels in a sulfuric acid solution"
   Materials Degradation, 5, 2021, 43 (11).
7. P. Thirathipviwat, S. Sato, G. Song, J. Bednarcik, K. Nielsch, J. Han
   "Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system"
   Mater. Sci. Eng. A, 823, 2021, 141775 (7).
8. Tack Lee, Kenta Aoyagi, Huakang Bian, Kenta Yamanaka, Shigeo Sato, Akihiko Chiba
   "The microstructure and mechanical properties of selective electron beam melting manufactured 9-12Cr ferritic/martensitic steel using N- and Ar-atomized powder"
   Additive Manufacturing, 45, 2021, 102075 (12).
9. T. Tomida, S. Sato
   "Variant Selection in Phase Transformation and its Influence on Texture and Martensite Starting Temperature in Steel"
   Mater. Sci. Eng., 1121, 2021, 012021 (6).
10. S. Suzuki, Y. Onuki, M. Uchida, S. Sato, T. Naruse, M. Watanabe, T. Sato, T. Ebata
    "Grain growth in soft magnetic ferritic stainless steels under compressive stresses at high temperatures"
    Mater. Sci. Eng., 1121, 2021, 012020 (6).
11. Yoshimasa Takayama, Yihe Xu, Tsuyoshi Yoshida, Hiroki Tanaka, Yusuke Onuki, Shigeo Sato
    "Texture evolutions in aluminum and Al-3%Mg alloy subjected to shear deformation and subsequent annealing"
    Mater. Sci. Eng., 1121, 2021, 012017 (6).
12. Yusuke Onuki, Shigeo Sato
    "In situ observation for deformation-induced martensite transformation during tensile deformation of SUS 304 stainless steel by using neutron diffraction PART II: Transformation and Texture Formation Mechanisms"
    Quantum Beam Science, 5, 2021, 6-1-12.
13. Kenta Yamanaka, Asumi Kuroda, Miyu Ito, Manami Mori, Huakang Bian, Takahisa Shobu, Shigeo Sato, Akihiko Chiba
    "Quantifying the dislocation structures of additively manufactured Ti-6Al-4V alloys using X-ray diffraction line profile analysis"
    Additive Manufacturing, 37, 2021, 101678 (12).
14. Yusuke Onuki, Takashi Hirano, Kazuki Umemura, Shigeo Sato, Toshiro Tomida
    "In situ neutron diffraction measurement during bainite transformation and accompanying carbon enrichment in austenite at iMATERIA, J-PARC MLF"
    Mater. Sci. Forum, 1016, 2021, 1079-1084.

2020年

1. 中川康太朗、林桃希、高野こずえ、松永裕隆、森広行、北原周、小貫祐介、鈴木茂、佐藤成男
   "Cu-Zn 合金の転位強化因子に及ぼす結晶粒径の影響"
   日本金属学会誌, 84, 2020, 374-381.
2. K. Yamanaka, A. Kuroda, M. Ito, M. Mori, T. Shobu, S. Sato, A. Chiba
   "In situ synchrotron X-ray diffraction line-profile analysis of additively manufactured Ti-6Al-4V alloy under tensile deformation"
   MATEC Web of Conferences, 321, 2020, 03026.
3. Koutarou Nakagawa, Momoki Hayashi, Kozue Takano-Satoh, Hirotaka Matsunaga, Hiroyuki Mori, Kazunari Maki, Yusuke Onuki, Shigeru Suzuki, Shigeo Sato
   "Characterization of dislocation rearrangement in FCC metals during work hardening using X-ray diffraction line-profile analysis"
   Quantum Beam Science, 4, 2020, 36.
4. Yusuke Onuki, Shigeo Sato
   "In situ observation for deformation-induced martensite transformation (DIMT) during tensile deformation of 304 stainless steel using neutron diffraction. PART I: Mechanical response"
   Quantum Beam Science, 4, 2020, 31.
5. 小貫祐介，増村拓朗，土山聡宏，佐藤成男，富田俊郎，��木節雄
   "中性子回折測定に基づくRietveld Texture Analysisおよび飽和磁化測定による加工誘起マルテンサイトを含有する鋼の相分率解析精度の相互検証"
   鉄と鋼, 106, 2020, 457-464.
6. 【日本銅学会第54回論文賞受賞】林桃希, 伊藤優樹, 高野こずえ, 森広行, 松永裕隆, 小貫祐介, 鈴木茂, 佐藤成男
   "固溶型銅合金における合金元素種による転位増殖への影響"
   銅と銅合金, 59 (2020) 70-75.
7. 中川康太朗, 高野こずえ, 松永裕隆, 森広行, 北原周, 小貫祐介, 鈴木茂, 佐藤成男
   "Cu-Zn合金の固溶亜鉛量による転位強化因子の変化"
   銅と銅合金, 59 (2020) 59-63.
8. Zigan Wei, Ping Yang, Xinfu Gu, Yusuke Onuki, Shigeo Sato
   "Transformation textures in pure titanium: Texture memory vs surface effect"
   Mater. Charact., 164, 2020, 110359.
9. Dan-dan Ma, Ping Yang, Xin-Fu Gu, Yusuke Onuki, Shigeo Sato
   "In-situ neutron diffraction investigation on the martensite transformation, texture evolution and martensite reversion in high manganese TRIP steel"
   Mater. Charact., 163, 2020,110244.
10. 平野孝史，小貫祐介，星川晃範，富田俊郎，佐藤成男
    "Rietveld texture解析を用いた鉄鋼ミクロ組織評価における 等方性温度因子の影響"
    X線分析の進歩, 51, 2020, 147-156.
11. 正岡佳純，小貫祐介，佐藤成男
    "六方晶金属の非等方的な結晶子微細化に対するWilliamson-Hall法の補正法検討"
    X線分析の進歩, 51, 2020, 223-230.

2019年

1. Yusuke Onuki, Takashi Hirano, Akinori Hoshikawa, Shigeo Sato, Toshiro Tomida
   "In situ observation of bainite transformation and simultaneous carbon enrichment in austenite in low-alloyed TRIP steel using time-of-flight neutron diffraction techniques"
   Metall. Mater. Trans. A, 50, 2019, 4977-4986.
2. 塙健太、小貫祐介、植村勇太、星川晃範、鈴木茂、大塚広明、千葉悠矢、佐藤成男
   "中性子回折による定量的なミクロ組織情報に基づく鉄系形状記憶合金の逆変態現象解析"
   鉄と鋼, 105, 2019, 998-1007.
3. M. Moshtaghi, S. Sato
   "Characterization of dislocation evolution in cyclically loaded austenitic and ferritic stainless steels via XRD line-profile analysis"
   ISIJ International, 59, 2019, 1591-1598.
4. M. Mori, K. Yamanaka, S. Sato, S. Tsubaki, K. Satoh, M. Kumagai, M. Imafuku, T. Shobu, A. Chiba
   "Tuning the strain-induced γ-to-ε martensitic transformation of biomedical Co-Cr-Mo alloys by introducing parent phase lattice defects"
   Mech. Behavior Biomed. Mater., 90, 2019, 523-529.
5. K. Yamanaka, M. Mori, I. Kartika, M.S. Anwar, K. Kuramoto, S. Sato, A. Chiba
   "Effect of multipass thermomechanical processing on the corrosion behaviour of biomedical Co-Cr-Mo alloys"
   Corrosion Sci., 148, 2019, 178-187.
6. K. Yamanaka, W. Saito, M. Mori, H. Matsumoto, S. Sato, A. Chiba
   "Abnormal grain growth in commercially pure titanium during additive manufacturing with electron beam melting"
   Materialia, 6, 2019, 100281.
7. Y. Tomota, M. Ojima, S. Harjo, W. Gong, S. Sato, T. Ungar
   "Dislocation densities and intergranular stresses of plastically deformed austenitic steels"
   Mater. Sci. Eng. A, 743, 2019, 32-39.

2018年

1. 【論文賞受賞】伊藤美優、伊藤優樹、小林敬成、松永裕隆、高野こずえ、牧一誠、森広行、鈴木茂、佐藤成男
   "固溶型銅合金の伸び特性へ作用する転位キャラクターの解明"
   銅と銅合金, 57, 2018, 18-24.
2. Y. Onuki, S. Sato, M. Nakagawa, K. Yamanaka, M. Mori, A. Hoshikawa, T. Ishigaki, A. Chiba
   "Strain-induced martensitic transformation and texture evolution in cold-rolled Co-Cr alloys"
   Quantum Beam Sci., 2, 2018, 11.
3. Y. Onuki, A. Hoshikawa, S. Sato, T. Ishigaki, T. Tomida
   "Development and verification of simultaneous measurement system for texture and phase fraction by time-of-flight neutron diffraction at iMATERIA"
   Mater. Sci. Eng., 375, 2018, 012035.
4. E.P. Kwon, S. Sato, S. Fujieda, K. Shinoda, K. Kajiwara, M. Sato, S. Suzuki
   "Microscopic stress characterization of functional iron-based alloys by white X-ray microbeam diffraction"
   Mater. Sci. Eng., 304, 2018, 012008.
5. 佐藤 成男, 黒田 あす美, 佐藤 こずえ, 熊谷 正芳, ステファヌス ハルヨ, 友田 陽, 齋藤 洋一, 轟 秀和, 小貫 祐介, 鈴木 茂
   "中性子回折ラインプロファイル解析によるフェライト系およびオーステナイト系ステンレス鋼の引張変形中の転位増殖その場観察"
   鉄と鋼, 104, 2018, 201-207.

2017年

1. R. Shishido, M. Uchikoshi, S. Sato, H. Todoroki, S. Suzuki
   "Micro-portion image analysis of light elements in Fe?Cr based alloys by time-of-flight secondary ion mass spectrometry"
   ISIJ Int., 57, 2017, 1425-1432.
2. Y. Onuki, A. Hoshikawa, S. Nishino, S. Sato, T. Ishigaki
   "Rietveld texture analysis for metals having hexagonal close-packed phase by using time-of-flight neutron diffraction at iMATERIA"
   Adv. Eng. Mater., 2017, 1700227.
3. K. Satoh, S. Sato, M. Ohuma, T. Naruse, Y. Kim, T. Ebata, S. Suzuki, K. Wagatsuma
   "Small-angle X-ray scattering studies on aging precipitation of high-strength soft-magnetic stainless steels"
   ISIJ Int., 57, 2017, 2028-2033.
4. 佐藤成男、小貫祐介、星川晃範、中川真惟子、山中謙太、富田俊郎
   "TOF型パルス中性子回折を用いた金属ミクロ組織解析"
   金属, 87, 2017, 965-972.
5. 伊藤美優、佐藤成男、伊藤優樹、森広行、松永裕隆、牧一誠、鈴木茂
   "固溶強化型銅合金の耐応力緩和特性に及ぼすミクロ組織の影響"
   銅と銅合金, 56, 2017, 45-50.
6. E.P. Kwon, S. Sato, S. Fujieda, K. Shinoda, K. Kajiwara, M. Sato, S. Suzuki
   "Characterization of microscopic deformation in Cu-Al-Mn superelastic alloy by in situ Laue diffraction study using white X-ray microbeam"
   Mater. Sci. Eng. A, 705, 2017, 6-10.
7. K. Yamanaka, M. Mori, S. Sato, A. Chiba
   "Stacking-fault strengthening of biomedical Co-Cr-Mo alloy via multipass thermomechanical processing"
   Sci. Rep., 7, 2017, 10808:1-9.
8. Y. Onuki, R. Ukai, S. Sato, S. Fujieda, K. Shinoda, K. Kajiwara, M. Sato, S. Suzuki
   "Characterization of microscopic stresses in a polycrystalline Fe-Ga alloy with large elastic anisotropy"
   Mater. Sci. Forum, 905, 2017, 3-8.
9. Y. Onuki, A. Hoshikawa, S. Sato, T. Ishigaki, T. Tomida
   "Quantitative phase fraction analysis of steel combined with texture analysis using time-of-flight neutron diffraction"
   J. Mater. Sci., 52, 2017, 11643-11658.
10. J. Saida, R. Yamada, P. Kozikowski, M. Imafuku, S. Sato, M. Ohnuma
    "Characterization of nano-quasicrystal-formation in correlation to the local structure in Zr-based metallic glasses containing Pd"
    J. Alloys Compds., 707, 2017, 46-50.
11. 塙健太、小貫祐介、轟秀和、齋藤洋一、鈴木茂、佐藤成男
    "圧延鋼板に対する中性子回折ラインプロファイル解析における散乱ベクトル方位の影響"
    X線分析の進歩, 48, 2017, 338-345.
12. 友田陽、佐藤成男、ステファヌス ハルヨ
    "中性子・X線回折ラインプロファイル解析の最近の進歩"
    鉄と鋼, 103, 2017, 73-85.

2016年

1. Y. Onuki, A. Hoshikawa, S. Sato, P. Xu, T. Ishigaki, T. Saito, H. Todoroki, M. Hayashi
   "Rapid measurement scheme for texture in cubic metallic materials using time-of-flight neutron diffraction at iMATERIA"
   J. Appl. Cryst., 49, 2016, 1579-1584.
2. Y. Onuki, A. Hoshikawa, S. Sato, T. Ishigaki
   "Rapid measurement of texture of metals by time-of-flight neutron diffraction at iMATERIA and its applications"
   Mater. Sci. Forum, 879, 2016, 1426-1430.
3. M. Isik, M. Niinomi, H.H. Liu, K. Cho, M. Nakai, Z. Horita, S. Sato, T. Narushima, H. Yilmazer, M. Nagasako
   "Grain refinement mechanism and evolution of dislocation structure of Co-Cr-Mo alloy subjected to high-pressure torsion"
   Mater. Trans., 57, 2016, 1109-1118.
4. Kozue Satoh, Shigeo Sato, Kenta Yamanaka, Shigeru Suzuki, Akihiko Chiba, Kazuaki Wagatsuma
   "Line-profile analysis combined with texture analysis for characterizing dislocation distribution in texture components of cold-rolled copper sheets"
   High Temp. Mater. Processes, 35, 2016, 705-7013.
5. Kozue Satoh, Shigeo Sato, Kazuaki Wagatsuma
   "Formation mechanism of toxic-element-free oxide layer on Ti-6Al-4V alloy in d.c. glow discharge plasma with pure oxygen gas"
   Surf. Coat. Technol., 302, 2016, 82-87.
6. 伊藤美優、佐藤成男、伊藤優樹、森広行、牧一誠、鈴木茂
   "X線回折ラインプロファイル解析によるCu-Mg合金における耐応力緩和特性に与えるミクロ組織因子の解明"
   銅と銅合金, 55, 2016, 202-207.
7. 佐藤成男、小貫祐介、菖蒲敬久、城鮎美、田代均、轟秀和、鈴木茂
   "量子ビーム回折法を用いた鉄鋼組織解析"
   金属, 86, 2016, 654-660.
8. S. Suzuki, S. Asano, S. Fujieda, T. Kawamata, K. Shinoda, T. Ikeuchi, S. Tsubaki, M. Kumagai, M. Imafuku, Y. Onuki, S. Sato, T. Fukuda
   "Microscopic lattice strains and magnetic domain structure in magnetostrictive Fe based alloys"
   Proceedings of 7th International Conference Magnetism and Metallurgy, 2016, 443-448.
9. 加藤倫彬、佐藤成男、齋藤洋一、轟秀和、鈴木茂
   "X 線回折ラインプロファイル解析によるステンレス鋼の加工硬化中の転位挙動解析"
   X線分析の進歩, 47, 2016, 167-172.
10. 内田真弘、佐藤成男、森広行、伊藤優樹、牧一誠、佐藤こずえ、鈴木茂
    "X 線回折ラインプロファイル解析法による銅合金の応力緩和現象の組織因子解明"
    X線分析の進歩, 47, 2016, 173-178.
11. Murat Isik, Mitsuo Niinomi, Ken Cho, Masaaki Nakai, Huihong Liu, Hakan Yilmazer, Zenji Horita, Shigeo Sato, Takayuki Narushima
    "Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion"
    J. Mech. Behavior Biomed. Mater., 59, 2016, 226-235.
12. Satoshi Semboshi, Shigeo Sato, Akihiro Iwase, Takayuki Takasugi
    "Discontinuous precipitates in age-hardening Cu-Ni-Si alloys"
    Materials Characterization, 115, 2016, 39-45.
13. Hiroshi Suzuki, Rui Yamada, Shinki Tsubaki, Muneyuki Imafuku, Shigeo Sato, Tetsu Watanuki, Akihiko Machida, Junji Saida
    "Investigation of elastic deformation mechanism in as-cast and annealed eutectic and hypoeutectic Zr-Cu-Al metallic glasses by multiscale strain analysis"
    Metals, 6, 2016, 12.

2015年

1. Shigeru Suzuki, Koji Hotta, Eui Pyo Kwon, Shun Fujieda, Kozo Shinoda, Masayoshi Kumagai, Kentaro Kajiwara, Masugu Sato, Shigeo Sato
   "Characterization of evolution of microscopic stress and strain in high-manganese twinning-induced plasticity steel"
   ISIJ International, 55, 2015, 2158-2165.
2. S. Sato, K. Wagatsuma, K. Satoh, H. Ogawa, M. Kumagai, M. Imafuku, H. Tashiro, T. Shobu, S. Suzuki
   "Characterization of dislocations of cold-drawn pearlitic steels using synchrotron X-ray diffraction"
   Proceedings of Asia Steel International Conference 2015, 2015, 574-575.
3. K. Satoh, S. Sato, M. Ohnuma, T. Naruse, Y. Kim, T. Ebata, S. Suzuki, K. Wagatsuma
   "Size distribution of precipitates in age-hardenable electromagnetic stainless steels determined using small angle X-ray scattering"
   Proceedings of Asia Steel International Conference 2015, 2015, 572-573.
4. Y. Yasuda, E. Kwon, S. Sato, S. Fujieda, K. Shinoda, S. Suzuki
   "Microstructural characterization of Cu-added transformation induced plasticity steels"
   Proceedings of Asia Steel International Conference 2015, 2015, 570-571.
5. Eui Pyo Kwon, Shigeo Sato, Shun Fujieda, Kozo Shinoda, Ryosuke Kainuma, Kentaro Kajiwara, Masugu Sato, Shigeru Suzuki
   "Characterization of deformation behavior of individual grains in polycrystalline Cu-Al-Mn superelastic alloy using white X-ray microbeam diffraction"
   Metals, 5, 2015, 1845-1856.
6. Yusuke Onuki, Shun Fujieda, Ryuji Ukai, Shigeo Sato, Masugu Sato, Kentaro Kajiwara, Shigeru Suzuki
   "Local stress development in polycrystalline Fe-17mol%Ga alloy under tensile loading - In situ measurement using synchrotron X-ray micro-beam"
   J. Alloys Compds., 653, 2015, 195-201.
7. Manami Mori, Kenta Yamanaka, Shigeo Sato, Akihiko Chiba
   "Texture evolution and mechanical anisotropy of biomedical hot-rolled Co-Cr-Mo alloy"
   J. Mech. Behavior Biomed. Mater., 51, 2015, 205-214.
8. Manami Mori, Kenta Yamanaka, Shigeo Sato, Shinki Tsubaki, Kozue Satoh, Masayoshi Kumagai, Muneyuki Imafuku, Takahisa Shobu, Akihiko Chiba
   "Strengthening of biomedical Ni-free Co-Cr-Mo alloy by multipass "low-strain-per-pass" thermomechanical processing"
   Acta Biomaterialia, 28, 2015, 215-224.
9. Shigeo Sato, Akifumi Hasegawa, Satoshi Semboshi, Kazuaki Wagatsuma
   "Effect of dislocations on spinodal decomposition, precipitation, and age-hardening of Cu-Ti alloy"
   High Temperature Materials and Processes, 34, 2015, 123-130.
10. Donglin Han, Kozo Shinoda, Shigeo Sato, Masatoshi Majimad, Tetsuya Uda
    "Correlation between electroconductive and structural properties of proton conductive acceptor-doped barium zirconate"
    J. Mater. Chem. A, 3, 2015, 1243-1250.
11. Masayoshi Kumagai, Shigeo Sato, Shigeru Suzuki, Muneyuki Imafuku, Hitoshi Tashiro and Shin-ichi Ohya
    "Residual stress analysis of cold-drawn pearlite steel wire using white synchrotron radiation"
    ISIJ International, 55, 2015, 1489-1495.
12. Shigeo Sato, Takahisa Shobu, Kozue Satoh, Hiromi Ogawa, Kazuaki Wagatsuma, Masayoshi Kumagai, Muneyuki Imafuku, Hitoshi Tashiro and Shigeru Suzuki
    "Distribution and anisotropy of dislocations in cold-drawn pearlitic steel wires analyzed using micro-beam X-ray diffraction"
    ISIJ International, 55, 2015, 1432-1438.

2014年

1. 佐藤成男、長谷川啓史、千星聡、我妻和明
   "X線回折サイドバンドピークに基づく時効強化型Cu-Ti合金におけるチタン濃度揺らぎ領域の解析"
   銅と銅合金, 53, 2014, 166-170.
2. H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, J. Hieda, S. Sato, Y. Todaka
   "Nanostructure of β-type titanium alloys through severe plastic deformation"
   Advanced Materials Letters, 5, 2014 378-383.
3. H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, J. Hieda, S. Sato, Y. Todaka
   "Microstructural evolution of precipitation-hardened β-type titanium alloy through high-pressure torsion"
   Acta Materialia, 80, 2014, 172-180.
4. Satoshi Semboshi, Shigeo Sato, Mikio Ishikuro, Kazuaki Wagatsuma, Akihiro Iwase, Takayuki Takasugi
   "Investigation of precipitation behavior in age-hardenable Cu-Ti alloys by an extraction-based approach"
   Metall. Mater. Trans. A, 45, 2014, 3401-3411.
5. Yuuki Arai, Shigeo Sato, Kazuaki Wagatsuma
   "Comparative study on the emission spectrometric determination of manganese using nitrogen-oxygen Okamoto-cavity microwave induced plasma and argon radio-frequency inductively-coupled plasma"
   Microchemical Journal, 116, 2014, 135-141.
6. S. Sato, Y. Arai, K. Wagatsuma
   "Spatially-resolved spectral image of a microwave-induced plasma with Okamoto-cavity for nitridation of steel substrate"
   Anal. Sci., 30, 2014, 237-243.